China EMT-1 CuSn10Pb10 Alloy Manufacturers, Suppliers, Factory - Dimensions, Specifications

Epen sentiasa mengkaji bahan dan pengembangan produk baru

EMT-1 CuSn10Pb10 Alloy description

EMT bi-metallic bushing (EMT-1 CuSn10Pb10 Alloy) is formed from steel strips with alloy lining material. The alloy lined surface can be machined oil grooves, holes, formed Indentations etc according to different application. It is suitable for high load, lower speed oscillation & rotation movement.

Data	Bahagian No.	EMT-1	EMT-2	EMT-3	EMT-4	EMT-5
Struktur EMT
Struktur EMT		Keluli + CuPb10Sn10	Keluli + CuPb24Sn4	Keluli + CuPb, 0	Keluli + AISn20Cu	Keluli + CuSn8Ni
Kod yang sepadan		SAE-792 (SAE797). JIS-LBC3.	SAE-799.JIS-LBC6.	SAE-48.JIS-KJ3	SAE-783.JIS-AJL．
		Clevite F100.GGB- SY.Daido L10. Federal Mogul HF -2F. Glyco 66.	Daido L23. Glyco 68		Federal Mogul TR- 20. Glyco 74.
Max Load Capacity P		150/mm ²	130/mm ²	120/mm ²	100/mm ²	140/mm ²
Greaes Lubrication
Max Speed		2.5m/s	2.5m/s
Maximum PVValue		2.8N/mm². m/s	2.8N/mm². m/s	2.5N/mm². m/s
Coefficient of friction		0.05~0.15	0.06~0.16
(Oil)Lubrication
Max Speed		10m/s	10m/s	15m/s	25m/s
Maximum PVValue		10N/mm². m/s	10N/mm². m/s	8N/mm². m/s	6N/mm². m/s
Coefficient of friction		0.05~0.12	0.05~0.15	0.06~0.17	0.06~0.17
Max Working Temperature
Greaes Lubrication		150°C	150°C	170°C	150°C
Lubrication		250°C	250°C	250°C	250°C	200°C
Alloy Hardness		60~100HB	45~70HB	30~45HB	30~40HB	70~120HB

Bushing O.D. (D）	Φ14>D≤22	Φ14>D≤22	Φ14>D≤22	Φ14>D≤22	Φ14>D≤22
Oil Hole Diameter (mm)	3	4	5	6	7

EMT-1	Advantageous in high load carrying capacity, anti-impact, lower wear. Suitable for Mid-load capacity & Midhigher Sliding velocitie. Bushings for Gearbox, Rocker arm, King Pin, transmission etc.
EMT-2	Higher fatige strength & load carrying capacity, goos running characteristics at higher sliding velocities. Suitable for Mid-load capacity & Mid-Sliding velocitie . Bushings for lubricating oil pumps . After surface specifical treatment, Bushings for Main bushes of high speed internal-combustion engine, Connecting Rod etc .
EMT-3	Very Good sliding Characteristics, good anti-seizure property, special material, Punched oil grooves & oil pockets are not feasible. Bushings suitable for hydraulic Pump,automatic gearbox. After surface specifical treatme
EMT-4	Mid fatige strength & load carrying capacity, very good fatige strength & load carrying capacity, very good sliding characteristics . Bushings for half-bearing of high speed, lower load internal-combushtion engine, aircomressor, refrigerator, hypoid gearbox, hydraulic pump, gearbox etc.
EMT-5	The material composition of the product conform to the requirements of the Ro HS, under certain conditions can replace the EMT-1, has good load pressure & good wear resistance. The disadvantage is that it cannot be used without oil lubricant. But has great advantage in a well-lubricated situation. Suitable for heavy & medium load, Medium & high speed, as well as large impact loads.